Error:
“There is no media in the specified device”
Symptoms:
Generally, “there is no media in the specified device” error pops up when you try to format a USB drive or other storage devices in HP format tool, Windows Disk Management or using DiskPart. And, if you check the Properties of the storage device it shows “used space 0 Bytes free space 0 Bytes capacity 0 Bytes”.
Causes:
Ejecting the drive in mid of the ongoing task may damage the internal structure of drive and corrupts its Master Boot Record (MBR) or Partition Boot Record (PBR).
Apart from these main reasons, there exist various other causes which may give rise to “There is no media in the specified device” error while using or formatting your USB drive or any storage device.
How to Fix There Is No Media in The Specified Device Error?
Here is how to resolve “There is no media in the specified device” error without losing data from your storage device.
Step 1: Recover Files from The Drive Showing There is No Media in The Specified Device Error
Note: Don’t add or save any new data on the drive showing “There is no media in the specified device” error until you fix it.
Why Yodot? – Yodot Hard Drive Recovery is an effective solution if you are facing any data loss crisis. This data recovery software supports a wide range of storage devices and perfectly restores your data in a few simple steps. Not just your inaccessible USB drive, even this powerful file recovery tool can get pictures off SD card without formatting irrespective of the error message your card is showing. So, worth a try when you are in need of recovering data from your storage devices after data loss, deletion or corruption.
Step 2: Fix There is No Media in The Specified Device Error
Try all these troubleshooting techniques one after the other to resolve there is no media in the specified device error.
Fix 1# Make sure your USB flash drive is properly seated in the USB socket. Also, try to plug it in other USB sockets and computers.
Fix 2# Go to My Computer and right-click on your USB drive. Select Properties, next Tools and click on the Now button. Enable Automatically fix file system errors and Scan for and attempt recovery of bad sectors. Hit the Start button.
Fix 3# Turn off your computer, connect the USB drive. Turn it on and press the F8 key immediately. In Advanced Boot Options windows, select Safe Mode with Command Prompt option. Type C:\windows\system32>X: and hit Enter. (replace 32 with 64 if yours is a 64-bit computer and X with the drive letter of your USB drive)
Type X:\>format X: and press Enter key. Hit Y when you are prompted with (Y/N) option.
Few users have a wrong perception that the USB flash drive which is showing “there is no media in the specified device error” is of no use and they replace it with a new one. But, think smart! Give a try for the resolution explained in this page and see it turns your USB drive normal. In case, if any other technique helped you in solving the above error then, feel free to share it here…
No user appreciates or wants blurry videos, but as an uninvited guest, issues like out-of-focus…
iPads are a go-to choice for viewing videos as they offer an immersive watching experience,…
CCTV cameras are vital for security in workplaces, homes, and public events. However, you may…
MP4 is one of the most popular and preferred multimedia formats due to its wide…
Viewing a video that's distorted, unplayable, or has audio sync issues on your Mac can…
MOV file corruption can occur for various reasons, such as incomplete transfers or downloads, improper…