Possible Ways to Get Rid of External Drive Error 0x80070570

Updated on March 17, 2022

Whenever Windows cannot complete the requested operation, it immediately throws an error code. Error codes are a common occurrence in the digital realm, and one such error that a Windows user might encounter is the error code 0x80070570. We basically get this when attempting to transfer data, file extraction, or install or upgrade an operating system. In this article, we will delve into the reasons for getting Error Code 0x80070570 and discuss several effective methods to fix it.

Understanding Error Code 0x80070570:

Error code 0x80070570 is a standard Windows error that occurs when a file is corrupted, or there is an issue with system resources during file operation, installations, or updates. For example, installing Windows 11 on a new computer or upgrading from Windows 10 to Windows 11. This error can occur on a folder or a storage device such as internal or external hard drives, USBs, memory cards, etc.

What Is Windows Error 0x80070570 With An External Hard Drive?

The error code- 0x80070570 is returned by Windows OS, especially when a hard disk is externally connected. An attempt to access external HD will simply state that- “Error 0x80070570 –“The file or directory is corrupted and unreadable.” This will not let you read any data saved on the drive, even if the data is still available in the storage.

Similarly, some people are searching for solutions to fix the error 0x80070570 message “The file or directory is corrupted and unreadable” or “An unexpected error is keeping you from deleting the file.”

Note: This typically happens when system updates have been interrupted in between, and the error appears like this- “Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070570. In that case, it is preferable to go with re-installation and perform a full virus scan.

Why Does Error 0x80070570 Appear?

As you already know, the error code 0x80070570 message usually appears during the initial installation or upgradation of Windows, and a damaged or corrupted drive can also cause the error. There are several other reasons why you might get this error:

It’s important to note that the above-mentioned are just general causes, and the exact reason for you to get this error 0x80070570 may vary depending on the circumstances.

So now, the major attention goes to safely retrieving files from the drive, especially when the backup is unavailable. Here are some fixtures listed to fix the Windows error- 0x80070570.

Note: We advise you to recover your data first (only if they are essential) because certain solutions, such as executing CHKDSK and formatting the disk, can jeopardize it. Therefore, we strongly advise you to recover your data using Yodot Hard Drive Recovery Software before moving forward with the recommended solutions.

How To Fix Windows Error Code 0x80070570?

Here are several tried and tested solutions to fix error code 0x80070570:

#Fix 1: Restart your Computer:

Try restarting your computer, as it frequently resolves minor technical issues or any misconfigurations in the operation system.

#Fix 2: Move Files to a Different Folder:

Storage corruption is one of the leading causes of error code 0x80070570. Moving the inaccessible to a different location is the easiest way to fix this issue. Additionally, you can check if corrupt storage or unreadable data are to be blamed for the error 0x80070570 using this method.

1. Open File Explorer, navigate to the location and select the inaccessible files.
2. Right-click and copy or cut the files or folders and paste them into a different drive (or external drive).
3. Finally, navigate to the new location (where you moved the inaccessible files), paste it and try accessing them again.

#Fix 3: Install Windows Driver updates:

As discussed above, it is sometimes due to issues within the system driver software. So, ensure that all your device drivers are up-to-date. If not, check for available updates and install them.

1. You can simply navigate through Device Manager.
2. Look for devices labeled with yellow exclamation.
3. Click the Update Driver option.

#Fix 4: Perform Disk Error Check to Fix Error 0x80070570:

Windows can become hampered by hard drive corruption and errors, which might result in error code 0x80070570. Use the Windows disk error-checking tool to examine and repair your device.

1. First, right-click over the externally connected drive and click on Properties.
2. Now go to Tools tab and click on Check.
3. If Windows shows any errors on the drive, click on Repair Drive to automatically fix the file system errors.

#Fix 5: Check Disk utility to Fix the Corrupt File or Directory:

1. Open the Command Prompt window by typing CMD in the search bar.
2. Type the following command: “chkdsk /f /r G:” (where G is the corresponding drive letter labeled in the system).
3. Now, allow the utility to scan and repair all the file system errors or bad sectors on the drive.

#Fix 6: Disable Antivirus software:

Windows firewall or a third-party antivirus tool might also block your system components which leads to the inaccessibility of some files.

1. To disable the Windows firewall, type Windows Defender Firewall and Windows Defender settings and turn it off.
2. Similarly, open the settings of the third-party antivirus tool that persists on your system and disable it.
3. Once you have completed both the above-mentioned steps, reboot your system and try accessing the files again.

If the issue still persists, then move on to the next session.

#Fix 7: To Fix the Corrupt File or Directory, Use Windows Startup Repair:

Windows Startup Repair feature provides other options like system repair and recovery. However, there might be slight changes in the appearance of the interface. Follow these instructions to run the startup repair and resolve the error 0x80070570.

1. Open the Control Panel by typing control panel in the search bar and click on Update & Security.
2. From the Left panel, select the Recovery option.
3. Click on the Restart Now option under the Advanced Startup section.
4. Once the system is restarted, in the advanced startup mode, click on Troubleshoot, go to Advanced options, and click on Startup Repair option.

These fixes may sometimes fail to deliver successful repair, which is when the driver faces severe damage. Under such circumstances, it may be necessary to recover the drive data, but how will it be possible to do so when the drive appears completely inaccessible? Don’t panic; if you are concerned about safeguarding your vital information stored on an external drive, then the Yodot Hard Drive Recovery program is one accurate remedy.

Fix 8: Format Corrupt Hard Drive or USB without losing Data:

The last resort is formatting your hard drive ( or External Hard Drive) or USB drive is corrupted and none of the above-mentioned methods have succeeded in fixing error code 0x80070570. We advise you to restore your data with the Yodot Hard Drive Recovery tool first because formatting will erase all your files.

Yodot Hard Drive Recovery software is excellently programmed to retrieve data from hard drives that are crashed / dead or that have stopped working due to various reasons. Even if the drive data is inaccessible, the built-in algorithms are efficient enough to fetch data from it. Also, one can easily copy files from corrupted hard drives and many other storage media.

Ultimately restores data without any pinpoint of changes to the original content. The software recovers data from hard drive with bad sectors, affected by virus attacks, file system corruption, and other hard drive damage issues.

Steps To Recover Data Off Hard Drive Showing 0x80070570 Error:

Download and install the Yodot Hard Drive Recovery program and follow the below-mentioned steps:

• Step 1: Launch the software and connect the HD media to a healthy Windows system.
• Step 2: Select the Partition Recovery option on the main screen.
• Step 3: Now mention the hard drive storage for the tool to perform a scan.
• Step 4: Preview and validate using either File Type View or Data View.
• Step 5: Continue saving retrieved HD data in some secure storage location.

Format External Hard Drive or USB Drive:

Once you have recovered your data, follow the below-mentioned steps to format your drive easily.

1. Open the File Explorer.
2. Right-click on the Hard drive or any other storage drive and select Format.
3. Click on the Quick Format option and click on Start to format the device.

Conclusion:

Hopefully, you have fixed the Windows error 0x80070570 using this article. To prevent any type of data loss or OS trouble, make sure you handle storage devices with care. If the error still persists please seek professional assistance.

Other Popular Software